Ellie playing a guitar

Image created in stable diffusion then used Hueforge to create the file. 

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

Filaments Used:
PLA Overture Black Transmission Distance: 0.6
PLA Overture Cement Gray Transmission Distance: 2.6
PLA Overture Chocolate Transmission Distance: 1.2
PLA Overture Space Gray Transmission Distance: 1.6
PLA Overture Light Gray Transmission Distance: 1.4
PLA Hatchbox Beige Transmission Distance: 3.5
PLA Overture White Transmission Distance: 6

Swap Instructions:
Start with Black
At layer #12 (0.6mm) swap to Cement Gray
At layer #14 (0.68mm) swap to Chocolate
At layer #16 (0.76mm) swap to Space Gray
At layer #18 (0.84mm) swap to Light Gray
At layer #26 (1.16mm) swap to Beige
At layer #28 (1.24mm) swap to White for the rest.
 

I printed with a 0.4mm nozzle at a 0.04mm layer height to get better blending.