Drillstops

There a lot of drillstops out there, but this is mine ;). I was not happy with the available ones here, so I decided to make my own ones. Sizes are 3,4,5,6,8 and 10mm, as these are my most common used ones. I also wanted to make them “color coded” without an MMU, so you can add a second color in Prusa Slicer.

I printed them in Fiberlogy Easy-PETG and Input Shaper 0.2 Structual, using 3 perimeter and 15% Infill for flexibility and stability.

You will need some 3mm Squarenuts (the slim ones!) and some Screws 3x10mm for them to work. 

Will be happy, if they can help You. Happy Printing ;)