E3 Sprite Extruder PTFE Mount V2

This is made for the Creality Sprite Extruder/Hotend kit onto the basic Ender 3. Allows for mounting a PC4-M10 fitting very close to the extruder inlet.

V2 is designed for a closer fit with less flexing. It also reduced the overall height by a few millimeters. Print as oriented in the file, large flat area down. I created a bunch of iterations for this release. Be careful not to overtighten the PC4 fitting as 3D printed threads aren't the strongest.

As always I can't confirm the fit on all adapters of the Sprite extruder, it was only tested on an adapter kit for the standard Ender 3.

Requires:

2 x M3-12 screws

1 x PC4-M10 fitting ext.

Let me know if there are any changes that need to be made. All suggestions are welcome.

V2 is designed for a closer fit with less flexing. It also reduced the overall height by a few millimeters.