Bambu Z-Axis Spinning Cover Plate

Just a decorative little cap for the Z-axis screws on BambuLab printers. Tested with my P1P, the nozzle clears it on both sides. I would be grateful if anyone would test this with the P1S and the X1C, as I don't have access to either of those printers. I used a 0.4mm nozzle to print this and it came out okay, although the designs are a bit blurry. A 0.2mm nozzle would probably be much better suited to this task, but I don't have one yet. Leave a comment about how well it works if you have one!

I have included the blank cap, a .3mf file of the cap with Jack Skellington's Face inlayed and colored for multicolor printing, and the .stl of the Jack Inlayed Cap. I will be adding a few more inlays over time!

Please post makes and let me see the cool inlays you make for it!