Minecraft Pumpkin Basket / Light

Minecraft Halloween candy basket, could also use the optional lid to turn it into a pumpkin light!

Required materials: 

• 10x M3 * 20mm (or 16mm) screws
• A hex wrench for M3 screws
• Glue to hold in the front diffusers
• A battery operated candle or pumpkin light
• Please do not use this with an open flame or candle! Only use battery operated lights!

Printing: 

• No support should be needed unless bridging is not available.
• The top stem for the top lid could be used with a multicolor system, or a layer change at 9.4mm could be used to achieve similar results.
• A multicolor file for the front plate has been included.
• A complete project file for Bambu Studio is included.

Assembly:

• Glue the diffuser panels to the front plate.
• Screw in from the holes at the top plate and the bottom plate, make sure the left and right panels are not mixed up by checking if the textures line up.
• Simply place the top cover onto the lid.
• If the handle is used, then screw the handle into the two sides of the top lid, a tighter fit could be achieved by screwing until there is resistance.