Flat Mesh Skirt - Voron 2.4 Center Logo mod using LED-strips

This is a stupid mod. Buy the correct PCB-LED's per jiral's original spec. But if you don't want to or happen to have 60Leds per meter LED-strips at home already and want to suffer the pain of soldering, here is the mod for you!

1. Print the parts.
2. Cut 4 pieces of LED-strip
   1. 2x single sections (for the short parts of the logo)
   2. 1x 2-LED long piece (for the long part of the logo)
   3. 6 LED long piece (for the ring outline)
3. Solder… lots of soldering. See the pictures for more info.

I recommend using a LED-strip that is 2 or 3 wires. Not an APA102 like i did that has 4 wires. Save yourself some work.

This mod allows you to use 60Led per meter LED-strips instead of the small PCB-style singular LEDs. You also get 6 LED's in the ring instead of 3. The spacing of 2 of the holes for the LED's in front part is also adjusted to match the spacing of the LED-strip.