Super Mario Bros. Coin and Stand

Coin dimensions:

• 12 cm diameter
• 2.5 cm widht

Stand dimensions:

• 10 x 5 x 5 cm

Print instructions:

• Printer: MK3S+
• Layer height: 0.2 mm
• Supports: Yes (only for coin)
  • organic
• Brim: Yes (4mm widht with  0.1 mm separation works well)

Another position to print the coin may work, but the vertical position with supports only where they exceed 35º minimizes marks when removing them. The stand hides the most notable marks anyway.