DIY KNOMI/esp32 devKit 1.28" round screen case

I had an esp32 devkit and 1.28 tft round display in my parts bin and thought I would load up the Bigtreetech Knomi code to see how it works and was pleased enough to make it a case to house the kit. I figured, why not share it for anyone else wanting to try. I designed the case to be easy to open but snap together firmly. it has access to the usb for power and programing, and little parts to allow for pressing the boot and reset buttons without needing to remove the esp32. Could be made into a nice little desk clock too. 

m3 screws are used to secure the esp32 otherwise everything else is held in place with the case snap feature.