Nosferatu [pre-supported]

Printing information

General

This is a rare one where the bust and base is just one piece. Proper old school.

There’s two versions, with different eyes. Concave and convex, as pictured here:

FDM instructions

This vampire should be printable without supports if you have a printer that handles overhang somewhat decently, but if you are unsure you might want to add supports right under his chin, but it’s been designed to be printed without.

Resin instructions

It comes in two formats.

1. Lychee Slicer Lite (.lyt) files, that you can edit the supports yourself in if you feel you want to make any changes before printing (this is the recommend way), and
2. Pre-supported and pre-hollowed .stl files. I don’t recommend these because if you use anti-aliasing you’ll be applying it to the supports as well, which makes the connecting area much less sturdy and increases the chance of print failure.

There’s of course also the regular STL files there if you want to do all the slicing yourself, or print at a much larger size using something like the Phrozen Sonic Mega 8K.