Deathstar under construction (Episode 6)

2023.10.24: Updated Colors since they were completely out of order.

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

!!!!  It appears you have mixed filament types.  Be certain this is what you want.  !!!!!

Swap Instructions:
Start with Black
At layer #6 (0.36mm) swap to Charcoal Black
At layer #13 (0.64mm) swap to Dark Grey
At layer #19 (0.88mm) swap to Silver
At layer #25 (1.12mm) swap to light Grey
At layer #30 (1.32mm) swap to White for the rest.