DAY OF THE DEAD MASK 01 HUEFORGE – 8 COLOURS

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:

PLA+ Sunlu Black Transmission Distance: 1

PLA SILK ZIRO SILK SILVER Transmission Distance: 5

PLA+ Sunlu Blue Transmission Distance: 4

PLA+ Sunlu Red Transmission Distance: 1.5

PLA+ eSUN Light Blue Transmission Distance: 3.5

PLA+ Sunlu Green Transmission Distance: 3

PLA+ Sunlu Pure Yellow Transmission Distance: 3.5

PLA+ Sunlu White Transmission Distance: 3

Swap Instructions:

Start with Black

At layer #3 (0.32mm) swap to SILK SILVER

At layer #8 (0.72mm) swap to Blue

At layer #12 (1.04mm) swap to Red

At layer #14 (1.2mm) swap to Light Blue

At layer #18 (1.52mm) swap to Green

At layer #20 (1.68mm) swap to Pure Yellow

At layer #23 (1.92mm) swap to White for the rest.