Hueforge H.R. Giger Study 01

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:

PLA+ Sunlu Black Transmission Distance: 1

PLA HATCHBOX NAVY Transmission Distance: 4

PLA+ Sunlu Red Transmission Distance: 4

PLA+ Sunlu Blue Transmission Distance: 4

PLA+ sunlu light blue Transmission Distance: 3

PLA+ Sunlu Green Transmission Distance: 3

PLA+ Sunlu Pure Yellow Transmission Distance: 3

PLA+ Sunlu White Transmission Distance: 5

Swap Instructions:

Start with Black

At layer #3 (0.32mm) swap to NAVY

At layer #6 (0.56mm) swap to Red

At layer #8 (0.72mm) swap to Blue

At layer #10 (0.88mm) swap to light blue

At layer #16 (1.36mm) swap to Green

At layer #18 (1.52mm) swap to Pure Yellow

At layer #19 (1.6mm) swap to White for the rest.