Halloween Raven

Remixed from 5 models that I found on thingiverse.
There are holes in the base for adding leds in the pumpkins.

Raven - Casual Pose https://www.thingiverse.com/thing:3891587
Pumpkin Head https://www.thingiverse.com/thing:2605388
Makies pumpkin https://www.thingiverse.com/thing:1083821
mountain of bones https://www.thingiverse.com/thing:3683012
Cheshire Pumpkin https://www.thingiverse.com/thing:2615873

Print instructions

Update oct 15: I added v2 of the base and wood that allows the raven to be printed separate from the base and makes the supports easier to remove. They can still be printed as one model.
I also added base_skulls_v2 that is a base without the pumpkins.

The gcode is created from default mk2.5 mmu2s profile with default Prusament PLA except 205C first layer temp.
Print was scaled to 125%, print time was 34 and a half hour.

I used the following filaments:

1. Fillamentum Vertigo Galaxy
2. Fillamentum Light Ivory (changed to Vertigo Galaxy after the skulls)
3. Fillamentum Signal Brown
4. rigid.ink Orange
5. Fillamentum Traffic Red