Logitech C270 mount

A minimal mount for a Logitech C270 webcam compatible with UltiMike's stepper motor strain relief. I wanted to mount my camera to this strain relief without adding much weight to the axis.

Keep in mind you'll need to do some work to get the camera aimed at the right angle and focused properly once you have it mounted.

I used an M3x20mm screw to mount the camera and an M3x16mm to attach it to the strain relief because that's what I had on hand. The camera is held at the proper angle with a M2x8mm screw. It helped to shave the ridge on the camera back so the M2 didn't catch on it as I adjusted the angle.

Updates:

UltiMike deleted their design from Thingiverse and has not to my knowledge re-uploaded it anywhere. The strain relief stepper mount is no longer available so I have removed the dead link.

Last Man Printing has made a mount that is compatible but doesn't have the cable strain relief of UltiMike's design. You can find it here -> Stepper Motor Adapter for Camera Holder