Collapsing Broadsword v2

This updated version of the Broadsword has a screw on pommel so the blades can be printed separately then inserted or replaced. There are three different versions, each has a different guard.

Supports are not required, for best results use a .4mm nozzle. The blades can be printed all at once concentrically or individually in vase mode. I suggest printing in vase mode but if printing concentrically, the test print can be found here. Find detailed instructions on how to print collapsing swords on my website. So the tip lines up correctly, I would suggest printing with a .2mm layer height.

Printed on the Muldex rep-rap IDEX printer