Luigi Lightbox LED Lamp

Introducing the Luigi Light Box: A captivating tribute to the iconic Luigi from the world of Super Mario. This 3D model embodies the adventurous spirit of the taller, green-clad Mario brother, capturing Luigi in his signature pose, ready for action. Every detail, from his distinctive cap to that friendly mustache, is meticulously crafted. When illuminated, the lightbox truly brings Luigi to life, making it a must-have for gaming enthusiasts. Let this warm, nostalgic glow evoke the magic of countless adventures with Luigi in the Super Mario universe. 🌟🍄

Materials and tools:
- glue gun
- aluminum tape
- led strip (here is the one I use): simple 1m white led USB

- soldering iron (optional)

RECOMMENDATIONS

- use a textured PEI sheet
- use the print profile, it has quite a few setting changes that help achieve the best results
- make a hole for the USB strip wherever you like it best with the soldering iron or in the slicer

- use the aluminum tape on the inside of the backplate to help with light diffusion
- glue the LED's the further away from the colored design possible; placing them too close ruins the diffusion and the individual LED's become visible

Bambu Slicer Settings:
I always recommend using the print profile I provided since it has settings with which I've been able to get the best results.
If you choose not to here are the main slicer settings I recommend:
- preferences (ctrl+P) → activate developer settings → Quality →Advanced → First Layer Flow Ratio: 1.04
- Quality → Wall generator → Arachne
- Quality → Wall transitioning treshold angle → 50º
- Strength → Advanced → Infill/wall overlap → 20%

Assembly video: