Dual Color Spider
Description
PDFVideo: https://www.instagram.com/p/CyjWU_0LJtO/
Easy to print dual color spider. Works well with PLA. Bend the legs using heat such as a heat gun, solder iron or lighter. A few seconds of heating then bend the legs. Do not overheat
How to: drag both multicolor_spider_red.stl and multicolor_spider_black.stl into the slicer and make sure they are combined in the right position. Assign black filament to multicolor_spider_black and red filament to multicolor_spider_red
If you dont have a multicolor printer you can print the multicolor_spider_black.stl and separate_multicolor_spider_red.stl separate and glue the parts together
Single color spider that works very well with TPU:
https://www.printables.com/model/10660-black-widow-spider
Subscribe or follow me on
Instagram:
https://www.instagram.com/agepbiz/
Twitter:
https://twitter.com/agepbiz
YouTube:
https://www.youtube.com/agepbiz
Model origin
The author remixed this model.
Differences of the remix compared to the original
Dual color design for IDEX printers or Printers with MMU or AMS. Prints well in PLA
