Skull with candle - multicolour print

A cute halloween decoration. 

I've included the .3mf, which was made in PrusaSlicer and should be compatible with all slicers. It contains the multicolour information and the hole in the top for an LED candle (the size of this can be adjusted for different candle types by modifying the size of the negative cylinder part). I've lowered the object into the bed to make the bottom flat.

I have uploaded the stl as well, but please note that the stl does not have a flat bottom or the hole for the candle. It is also a single object and therefore doesn't have any multicolour information either. 

The print requires three colours: Black, white, and the candle colour. It can therefore be printed on most multimaterial printers (Prusa MMU, Prusa XL, Bambu AMS). 

The model in the photos was printed on a Prusa XL at 0.45mm layer height with a 0.6mm nozzle. Some supports were required for the bottom of the skull. All print details are in the .3mf. 

We used this as a test print on our Prusa XL and talked about the settings we used in this video: