Quest 3 "Quest Pro" Style Gasket for Increased FOV / Open Periphery

This gives you a faceplate that can increase FOV and give you that peripheral vision like a Quest Pro. I prefer this “open” design and many others do too.

You will have to use a bit of velcro tape and source your own pad.

Recommend printing as oriented with organic supports. (0.2mm layers was fine for me)

Edit 1: Added a Larger Nose version for a bit more nose space.

Edit 2: Added a revision with better clips, larger nose support and sides that come slightly lower down for more stability (Because of this I would recommend more of a cut “U” gasket instead of a quest pro style gasket. (If that makes sense)

2024-09-19
I added a tweaked version that gives a bit more support on the sides, but still leaves the bottom area open, (Some might like this, some might want the original version; it also has a much cleaner nose area that stops it from bumping into your nose all the time.

I adjusted the model by adding open sections to mimic the quest pro design.