Modular Spool Drawers

Modular spool drawers system to fit Arianeplast and Sakata spools. It will certainly fit other filament spool brands, please notify me if you see other filament brands that are compatible !

Just print 1 “Bottom”, 1 “Top”, as much “Inter” as you need.

And 3 “Drawer” parts per spool.

No support, No Brim, just 4 perimeters and 30% infill. 

**Instructions**

You have to drill each spool 2 times at 3mm or 3.5mm, just as it is on the picture.

Use 6 M3 screws per spool, 8 or 10 long, and adjust the tension so the movement is smooth but not totally free. Take care not to install the drawers upside down ;-)

I glued some soft pads under the bottom, you can use anything that's a little sticky, like dense foam or some rubber pieces.

Edit : Now there are two versions of the bottom : one 198mm diameter that fits nicely with the spools, and one 172mm diameter that fits nicely a mini+ bed ;-)