Shelfsystem for IKEA BAS display box.

A shelfsystem for the wooden IKEA BAS display boxes with a glass front (30x20cm). Up to three shelves can be used.
15
126
0
326
updated April 15, 2024

Description

PDF

I designed this "shelfsystem" for some wooden IKEA display boxes I got myself years ago which came with a glass front. These boxes can be mount horizontally or vertically.   

Iirc these ones were called "Bås", it seems they aren't available anymore though. Back then they were available in two sizes, this shelfsystem is for the bigger one (~30x20cm) being positioned horizontally as shown in the picture.  

You need two side parts and minimum one shelf, you can use up to three shelves.  
The distance between the shelves is ~42.5mm, mind that the sideparts have one end with a slightly bigger distance from the corner to the first mounting notches (44mm).  
The shelfsystem is 55mm deep and gives you about 5mm clearance between the glass plate and the shelfsystem when installed in the box.  

I printed everything with a 0.6mm nozzle and 0.2mm layer height and was able to print everything without supports.  
The side parts (~188x55x5mm) can be placed with the front side (wider openings of the notches) down onto the bed for a smooth finish.  
The shelf itself (~292x55x8mm) needs to be placed diagonally across a typically 220x220mm bed and in a upstanding position for being able to print it. I used a 7mm brim which worked out just fine. 

When assembling the shelfsystem, make sure to position the shelf with the flat side upwards, so that the curved side is facing downwards.  

I used transparent PETG for this, but due to the PETG being a bit flexible, it might be better to use PLA to avoid a downward bending of the shelf in the middle.  

 

Check out my comprehensive infosites if you own any of the following Anycubic printers:  
- Kobra Go or Kobra Neo: https://1coderookie.github.io/KobraGoNeoInsights/   
- Kobra 2: https://1coderookie.github.io/Kobra2Insights/  
- Kobra 2 Neo: https://1coderookie.github.io/Kobra2NeoInsights/ 
- Kobra 2 Pro: https://1coderookie.github.io/Kobra2ProInsights/  
- Kobra 2 Plus: https://1coderookie.github.io/Kobra2PlusInsights/  
- Kobra 2 Max:  https://1coderookie.github.io/Kobra2MaxInsights/  

Tags



Model origin

The author marked this model as their own original creation.

License