All-Sky Housing Box for Raspberry Pi and ZWO Cam

A simple printed box to hold a Raspi 4B with a POE HAT and a ZWO camera. This uses threaded heat inserts for M3 screws and the dome is listed as 3.1 inches from JMX. The gasket is made from RTV Gasket Maker allowed to cure for several days then cut open with a razor. There is a hole in the side for a cable gland which fits a standard ethernet line. The holes in the lid allow waste heat to enter the dome and act as a dew heater. The plate for the bottom is simply glued to the bottom of the box and a ¼-20 insert added.