FGC-6: display stand for the GBB models

2-03-2025
plates with the Untangle logo have been added
and pistol and HPA FPA sized mags added
---------

17-08-2014 
pistol stand plates have been added for AW VX, WE tech G-Tech, TM Gen 3, AAP-01, and similar replicas

note: the stingray mag will not work on GBB pistols replicas

---------

Update:
stingray mag added
-

sure this looks like this is done before, and in a way it’s for the FGC-9 models.
but this one is made to work for the FGC-6 GBB models, so the FGC-6H,FGC-6BL,FGC-6SF,FGC-6FA,
what makes it different the mag got a cutout for the fire pin, that will strike the GBB mag. so it can stay in the relaxed position.
also the mag feed lips are slightly cut so it rest against the bolt

there are a view models. and 2 options
1 to 3D print every thing. there for you will need 2x M3 bolts that are 25mm or 30mm long

or

2 go for the DIYver this means that you will just use your own base plate and drill and screw the DIYver mag on to that

can it support all configurations? I have tested a view and it looks to work fine. but you might make it more front of back heavy than I have shown here

print settings:
0.2 layer hight should be fine.
you can use the 10 layer walls and a 40% infill.