This is one of my keyboard designs I made with my keebcu keyboard customizer. It is a smallTKL mechanical keyboard with ISO layout which can be printed on smaller printers such as Prusa Mini. Small TKL is TKL keyboard but squeezed together and removed one column.
If you want to build the complete keyboard at once, I added the complete models also.
This design uses an Teensy2 or a ProMicro as controller (please select proper files for your cotroller). If you want some customizations, check out the repository and modifiy the keyboard files or build yourself a custom one.
You can also create a complete new layout or check out other available layouts. OpenSCAD files and documentation:
https://github.com/andimoto/keebcu
You need:
Wiring can be found here (only Teensy2): https://github.com/andimoto/keebcu/tree/develop/wiring_sheets/andimoto_SmallTKL_iso
Wiring of ProMicro is different. Please check out andimoto7583 keyboard wiring for hints.
Also Firmware for ProMicro has to modified.
Filament:
Recommended Filament : PETG
PLA should be ok, too.
Notes:
Use brim for the case with all the switch holes. When printing with Prusa Mini this may be difficult, but disable the outer line. Just print some mm of brim.
The author marked this model as their own original creation.