This is a torso sculpt of a male and a female, optimized for vase-mode printing.
Intended for decoration, or as a vase/pot.
There are two versions, one “bodypots.stl”, and one “body_pot2_more_optimized.stl”. The second model is updated to work better with vase mode with smaller nozzles, such as 0.4mm nozzles, and is recommended for most users.
I recommend that you print with a large line width and low layer height. For example if you want to print a 20cm tall pot and have a 0.4 nozzle, use a line width of 0.6 and height of 0.1mm.
The author marked this model as their own original creation.