Universal toolkit holder for supplied tools with the original ender 3v3 se, mounted directly on the filament spool holder. No dissasembly needed.
I used 2x M3 heatset inserts and 2x M3 screws with washers to attach it to the printer, but you can also use “selftap” files to avoid using heatset inserts.
To print tool holder with logo, you first need to print only logo and then (without removing it from printer bed) print rest of the body. Make sure you aligned logo and holder properly - logo should be in the hole for it and both models should be lying flat on print bed (rotated 180°)
You can load logo with holder at the same time, and load them as single object with multiple parts - should load it with parts on correct spots.
Your slicer might give you warnings that models are overlapping but that shouldnt be a problem
First print - logo only
Second print - holder
Heres more detailed tutorial on how to print using this method [youtube].
The author marked this model as their own original creation.