Senseo HD 6554 handle

Replacement handle for the Senseo HD 6554 coffee machine.

I would recommend printing it with it's side down with enabled supports. This helps making the part structurally stronger due to the fact that the strength is worse in z-direction because layer adhesion is worse than the strength in a single layer.

100% infill is recommended.

IMPORTANT UPDATE
After my part broke after a few months of usage, I've tinkered a lot with different printing methods to improve strength.
The best method is to insert a 2mm thick and 50mm long metal part into the updated file. This increases the strength exactly at the part with bad layer adhesion.

For this, I bought one meter of 2mm welding line at a local store for just 1.80. I would recommend inserting it carefully, you may have to use a hammer to properly insert it.

If you don't want to enhance the strength by using metal, just print the normal version.