This hub is made for 6 CDs/DVDs "blades" and i have sliced it in half for easy print. once printed and glued you should install 608zz bearing on each side and use an 8mm bolt as an axle.
Please note that one half has 1 dot, second half has 2 dots. that is to make sure you don't copy the model halfs as they are different. you should print one of each.
This hub spins CW. if you wish for it to spin CCW, you can chose to mirror the model according to which way you want your pinwheels to spin. I chose to make CW and CCW pinwheels for my liking.
Printed using PLA+@[email protected]@100% part cooling. infill to your liking.
enjoy.
The author marked this model as their own original creation.