Glade Runner Trailer- Black Crow

1:8 Scale tandem axle trailer for Glade Runner 

Glade Runner model here- https://www.printables.com/model/551978-glade-runner-rc-airboat-18-scale-by-black-crow 

________________________________________________________________________________________________________________

Trailer has functional tongue jack. The axles articulate and conform to uneven ground. Uses 1/8inch bungee strap for tie downs. This is an improved version of the car trailer modified for the Glade Runner airboat. 

Supports:

No supports needed EVER!  Supports are built into the Model. (Because of the built in supports and fine detailed areas a 0.4 nozzle or Adaptive slicer must be used) 

Printer Settings:

0.4 nozzle 

.2 layer Hight (no bigger) 

Infill Axles and wheels 50-80% Everything else 20%

Filament:

Models are designed around the use of a strong PLA. For best results use Prusa PLA, Inland Plus, CC3D Max, ( Hatchbox PLA does not test well with my models) 

Glue:

This model does not use glue for structural support. Glue is used to hold in license plate, brake lights and other fine detail work. Screws are used to hold model together.

________________________________________________________________________________________________________________

                                                                   Hardware

Links are US Amazon Affiliates  

Tires - 1:14 scale truck tires 30mm wide https://amzn.to/4ax19qP 

Bearings - 8 -  10mm x 15mm x 4mm  https://amzn.to/4cPEnfx 

Bungee Cord:  1/8inch by 1 meter or 3 feet ( I think people are going to find many home uses for these bungee straps so extra might come in handy) https://amzn.to/43V13Xs 

Random Stickers I used two random stickers for added color and detail. If I didn't list them someone would call me out. 

________________________________________________________________________________________________________________

Screw Count: (screws are regular machine thread) 

M3 eye bolt- 2 https://amzn.to/3TViAui 1 for the trailer 1 for hitch ( you can use your hitch instead)

M2 

6mm - 6

8mm - 81 (you can replace some of these with 6mm on the guides)

10mm - 47

16mm - 1

Screws holding the wheels on 32- ( 6mm to 12mm) your choice 

M3

M3 - treaded rod 100mm 

Nuts- 6

Nylock nuts- 10

fender washer- 1 (optional- you can replace washer with M3 nut) 

6mm - 5

8mm - 17

10mm - 16

12mm - 8

20mm - 22

30mm - 2

Update: March 13-2024 Uploaded correct 004Hitch