Bambu Lab P1P XTouch Screen Mount

Mount for XTouch screen on the original P1P screen. Model has a holder for stylus which comes with the screen. It also has a cable mount and I added some cable holders to safely guide the cable in the inbuilt P1P USB connector. I added a mainboard cover which is attached using M3 bolts into heat inserts. 

Other parts list:

4pcs M3 screws

4pcs M3 heated inserts

1pcs zip tie

Double sided tape

XTouch Project:

https://github.com/xperiments-in/xtouch

The XTouch ESP32 Board you can buy here:

2.8 Inch Display Screen ESP32 for Arduino LVGL WIFI BT Development Board 240*320 2.8 inch LCD TFT Module with Touch WROOM - AliExpress

Added stylus holder.

Added mainboard back cover.

Added holes for heated inserts.

Added holders for cable.

Removed P1 Touch text (due to massive overhangs).

Shortened the mount to original screen (quicker and easier installation).