Pentacle tealight holder (1-piece 200mm)

A pentacle to hold 5x standard battery-powered tealights.

A symbol for each of the five classical elements, Fire, Water, Air, Earth, and Spirit face each point of the star.  

Do not use real burning wax candle tealights - it will melt, catch fire, and burn your house down.

Do not use for ritual magik or summoning of extradimensional eldrich horrors unless you are a Competent Person. If you are not sure what constitutes being a Competent Person in such matters then you are not one, but you may still enjoy it as a party decoration or low budget movie prop.

If giving as a gift, note that it fits nicely in a typical filament box (in fact two stacked on top of each other would fit even better). You could turn the box inside out to present unprinted faces to the recipient of the gift.

Silk gold PLA is a good choice of material. It should be an easy print. The gcode has 0% infill. The 3mf and STL allow you to do as you please. The model files I have uploaded are of a higher resolution than the one in the photos, so there should be minimal or no faceting in your print.

Got bigger demons to summon? Then take a look at my large 38cm 5-piece pentacle - much bigger and with more attractive proportions than this one, though a bit more fragile.