Evil Pumpkin - Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA JAYO Black Transmission Distance: 0.3
PLA Kexcelled Red Transmission Distance: 4.5
PLA GEETECH Gray Transmission Distance: 3
PLA PolyTerra Earth Brown Transmission Distance: 0.3
PLA PolyTerra Sunrise Orange Transmission Distance: 2
PLA+ Esun Orange Transmission Distance: 5
PLA Kexcelled Fluorescent Yellow Transmission Distance: 8
PLA JAYO White Transmission Distance: 6

Swap Instructions:
Start with Black
At layer #4 (0.4mm) swap to Red
At layer #10 (0.88mm) swap to Gray
At layer #11 (0.96mm) swap to Earth Brown
At layer #12 (1.04mm) swap to Sunrise Orange
At layer #17 (1.44mm) swap to Orange
At layer #18 (1.52mm) swap to Fluorescent Yellow
At layer #19 (1.6mm) swap to White for the rest