Speaker Base

Cooler Master Qube 500 is an incredible device and now with Audio! You can use any Speaker that has a size of 140cm wide by 110cm deep.

CHARACTERISTICS

Simple assembly
You can print in any color
Use it as a Speaker Base or anything else
Recommended print settings

PRINT SETTINGS:

Material: PLA, PETG, ABS/ASA.
Layer height: 0.2-0.3
Nozzle diameter: 0.4mm
Filling: 20%
Perimeters: 3Layer height: 0.2 mm (0.1 mm for better details) but you can use 0.3 mm

Mounting

The large Base you can print without support.
The Side Rails Fit into the Side Bases, They Are Equal to Each Other.
To assemble it, Place the side Bases inside the Large Base and then on the teeth of the Arm, and join it with the screw that adjusts in the desired position