ReRemix Voron 2.4 Clee Beefy Z Idler
nuts replace heatsets / 20mm pins / idler pulley clearance
23
52
1
980
updated October 15, 2023
Description
PDFPrinted body at 60% triangle pattern, carrier at 100%, .3mm layers with .6mm nozzle
Hardware:
8x 30mm M5 BHCS for bodies
8x 45-50mm M5 SHCS/BHCS for carriers
4x 20mm pins
4x 9mm gt2 pulleys
8x 0.8mm-1.0mm M5 washers
pullies should spin freely and not have side to side play, if you are like me and have grab bag of different thickness M5 washers laying around use calipers to determine thickness and shim according to your own ABS shrinkage/Pulley width tolerances
Model origin
The author remixed this model.
Differences of the remix compared to the original
- Changed heatsets to M5 nuts (4mm worth of thread into the upper mounts)
- Carriers modified for 20mm pins (just what I had around)
- Carrier aperture slightly widened for 9mm pulley and 2x m5 washer fit
- Carrier height +1mm to prevent pulley rubbing
- M5 holes in carrier slightly enlarged to prevent binding
