Gantry Mount for TriangleLab Filament sensor
Gantry gwivel mount for the trianglelab filament sensor
0
8
0
73
updated October 15, 2023
Description
PDFNot a fan of the stock filament sensor on the CR-6, which also doesn't really work in different orientations. So created this mount for the trianglelab sensor.
Printed in PETG, required hardware is one 8x22x7 bearing, one M8x20 screw, and two M4x8 screws with T-slot nuts.
Tags
Model origin
The author marked this model as their own original creation.
