Charlie HueForge painting

HueForge painting based on a picture of SteveBuilds and Charlie that was posted to his YouTube community page after Charlie passed away.  Any black should work for the base layer, I actually used Polymaker Jet Black ASA.  It took quite a while to do the initial slicing on my i7-12700k with 64GB of RAM - be patient!

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
ABS PolyLite Black Transmission Distance: 0.3
ABS PolyLite Galaxy Dark Grey Transmission Distance: 0.5
ABS PolyLite Galaxy Orange Transmission Distance: 3
ABS PolyLite White Transmission Distance: 4.5

Swap Instructions:
Start with Black
At layer #5 (0.48mm) swap to Galaxy Dark Grey
At layer #11 (0.96mm) swap to Galaxy Orange
At layer #14 (1.2mm) swap to White for the rest.