Brompton cable gatherer front brake

Cable Guide for any Brompton folding Bicycle securing the cables close to the front brake cable. Replaces the original part with the ring (broke in my case). Easy to print geometry, with a hole to fix the Light Cable with a zip tie.

There are to versions with different heights. One with 25mm and one with 19 mm. Original part is 19 mm in height, but I decided to insert the brake cable a bit deeper and in that case I skaled it to 25mm.

The inner diameter in both versions is 6mm. This is standard for brake hose end caps. If your printer needs more tolerance skale to what ever you need.

There is a thin layer at the transition of the diameters, so you dont need any support. After printing just brake the thin layer with the brake cable trough. Maybe some Raft will help you.