Spring loaded Mask Rack | Keychain Board | Masken-Garderobe

This is a new requirement in basically all households: a rack to put your face mask, ideally placed directly next to your apartment door. It's inspired by the actual coat rack we have, just scaled down.

This board provides 5 spring-loaded hooks, that will fold back, if not used.

The Board-Part can be done in either one color, or if you do have a 2-filament-printer available in two colors.

Additionally to the parts than need to be printed you do need a axis, as well as 5 ballpoint pen-springs.

BoM:

• 5 x hook (stl)
• 1 board (either the one- or two-color-version)
• 1 axle, aluminium, diameter 5mm x 165mm in length
• 5 springs from give away pallpoint pens
• 2 power strips, to fix it to the wall