Spoolholder up to 3kg spools

This Spoolholder was designed to be easily printable without any support as an excersise for 3D modelling.

The Screw and Nut assembly allows you to secure and center any type of spool. It is designed to hold up to 3kg spools. though I have not yet tested that fit.

You will need 2x 608 bearings. I used these: https://www.amazon.de/dp/B07HGXXX37?psc=1&ref=ppx_yo2ov_dt_b_product_details

you have to print:

1x frame

1x Screw

1x Nut

2x mounting thing (change orientation to bring the peg in paralell with the build plate)

Insert the 2 bearings into each end of the screw. then assemble and start printing :)