Caverna organizer Remix

You can print it as below.

Original printout

1. caverna - players holder
2. caverna - tiles holder 2x24
3. caverna - tiles and markers holder
4. caverna - coins holder → You have to change the height to 39mm and pull it out to prevent it from spilling.
5. caverna - tiles holder 1x24 → Pick 7.

New output

1. caverna_card x3
2. caverna_res01 x7
3. caverna_res02 x4
4. caverna_res03 x3
5. caverna_longtile01 x2
6. caverna_tribetile
7. caverna_tilesandmarkersholder_addon
8. battletile_lib

How to organize

1. Gather the resource containers. (In the case of [res03], make sure there is one vertical line.) 
2. Place the construction tile storage plate on its side.
3. Place the card holder in an upright position.
4. Stack your personal plates.
5. Stack and organize various tile boxes as shown in the image.
6. Build a timing board.
7. It is taller by stacking the construction boards added in the race version and expansion to a total of 4 to form 3 blocks.
8. Spread out the information cards added in the expansion and spread them out.

In the photo, I tried making a new design of the power token, but it wasn't particularly efficient, so I discarded it and added a cap.

1. The length was increased to prevent one or two less long tiles from being placed.
2. I removed the card case and made two thin card cases to fit on top of the resource case. (Sleeves are supported.)
3. In order to place the resource containers, [4 construction boards], and [cards] at the bottom, the size of the resource containers was slightly reduced and three of the large resource containers were made into smaller versions.
4. Added a construction tile case to hold expanded race-specific tiles.
5. Added space to place the [Goblin tiles] added in the expansion of [caverna - tiles and markers holder].