Screw Claw for Screwdriver and Bits

Screw claw to hold screws in front of the screwdriver. Allows easy one-handed screwing without the screw falling off.
55m
3× print file
0.20 mm
0.40 mm
3.00 g
1,539
3177
33
19 k
updated November 6, 2023

Description

PDF

Screw claw to hold screws in front of the screwdriver. 
Allows easy and one-handed screwing without the screw falling off the bit.

You can support me with a coffee: https://www.buymeacoffee.com/maxwxyz

Place the screw claw on the front of screwdriver / bit and insert the screw. Then tighten the screw as usual. The screw is held by the clamp and does not fall out, even upside down / over head.


The claw is available in two options:

  1. Two-piece set for larger screws
  2. One-piece claw for smaller screws

 

Print in PETG for flexibility. Remove stringing if necessary.

--

Schraubkralle um Schrauben beim Anziehen mit dem Schraubendreher oder Bit zu fixieren. Ermöglicht einhändiges Verschrauben, ohne ein Runterfallen der Schrauben.

Tags



Model origin

The author marked this model as their own original creation.

License