HDZero Goggle Rail Cold Shoe Mount

Addition for the HDZero Goggles, to add a cold shoe mount via the front rails.

Enables you to use cold shoe compatible microphones such as the Rode VideoMicro.

There are two files, as the cold shoe mount is rotated 7.5 degrees relative to the rails in order to point directly forward. 

The right hand mount is for the cold shoe at the top of the goggle from the perspective of the wearer. Vice versa for the left hand mount. If you want the cold shoe at the bottom of the goggles then use the opposite handed model and simply mount it upside down.

Use your slicers lay flat command or rotate it by 7.5 degrees so that the flat edge sits flush with the build plate.