Haloween Magnets

This is a set of 6 Halloween magnets for a refrigerator or magnetic whiteboard. They have a cavity or two (depending on size) for an embedded 8mm x 2mm magnet. 30mm, 40mm, and 50mm versions provided.

You could also apply an adhesive magnetic tape/strip/square to the back.

To embed the 8mm x 2mm magnet inside the print place a pause in the slicer at the appropriate level just before it bridges over the cavity, insert the magnet, and then resume the print. 

Attribution for Two of the Designs:

Skull Drawing SVG: RootOfAllLight, CC BY-SA 4.0 <https://creativecommons.org/licenses/by-sa/4.0>, via Wikimedia Commons

Witch Drawing SVG: Lorc, CC BY 3.0 <https://creativecommons.org/licenses/by/3.0>, via Wikimedia Commons