[REMIX] Stargate - Outer part

This is a remix of Outer_*.stl parts from '5ft Lighted Stargate' (Thingiverse ID 2783393).

Orignal Outer component consists of two parts:

• Outer_Left.stl
• Outer_Right.stl

I was printing the '5ft Lighted Stargate' with 66% of its original size and was not really satisfied with the original top surface design.

The redesign of the surface is based on the following images found here

• https://www.wallpaperup.com/347472/STARGATE_ATLANTIS_adventure_television_series_action_drama_sci-fi_(3).html
• https://www.etsy.com/de/listing/537968617/stargate-sg-1-plan-alter-stargate-druck

Attention/Note

If you want to print this piece for the original '5ft Lighted Stargate' size you have to use the Outer_151.5151515.stl.

EDIT 5th April 2020

Added (optional) insert parts, which have to be pressed (or maybe glued) into the Outer Stargate part. Should also be compatible with the original Outer_Left/Right.stl (use Outer_Inserts_151.5151515.stl).

I did not designed them into the main object, because of the tilt position. The details of the peak and edges of these objectparts are print layer height depend and they did not look nice in the slicer preview.

EDIT 25th August 2021: Added splitted version with the original size of '5ft Lighted Stargate' -> Outer_*_original_size.stl. Created this on request and did not made any test print.

Print Settings

Printer Brand:

Prusa

Printer: 

I3 MK3S

Rafts:

No

Supports: 

Doesn't Matter

Resolution:

0,1mm

Infill: 

15%

Filament: DasFilament PLA anthracite Additional print details ========================

Nozzle: 0.4mm

Print time: 6 hours

Optional

Supports only for the connection socket holes.

Category: 3D Printing

Remix of Outer_*.stl with different surface details.