[REMIX] Stargate - Inner part

I made a remix of the Inner.stl from '5ft Lighted Stargate' (Thingiverse ID 2783393).

I was printing the '5ft Lighted Stargate' with 66% of its original size and was not really satisfied with the provided design and shape, because it does not match the Stargate from the movie/series.

The redesign is based on the following images found here

• https://www.wallpaperup.com/347472/STARGATE_ATLANTIS_adventure_television_series_action_drama_sci-fi_(3).html
• https://www.etsy.com/de/listing/537968617/stargate-sg-1-plan-alter-stargate-druck
• and my Stargate DVD collection

In the movie/series the design of this part of the Stargate has not a repeating pattern and therefore a few different Inner design patterns would be needed to get close to it.

I did not had time to create all these variations and therefore made ONLY A VERSION with a repeatable pattern which suits my taste.

There is also an insert part, which has to be pressed into the holes of the Inner unit (thirty pieces needed per unit).

I did not designed them into the main object, because of the tilt position. The details of the peak and edges of these object are print layer height depend and they did not look nice in the slicer preview.

Attention/Note

If you want to print this piece for the original '5ft Lighted Stargate' size you have to use the*_151.51.stl* files.

EDIT 25th August 2021: Added splitted version with the original size of '5ft Lighted Stargate' -> Inner_*_original_size.stl. Created this on request and did not made any test print. Additional note: printing can be tricky because of small/tiny perimerters and objects.

Print Settings

Printer Brand:

Prusa

Printer: 

I3 MK3S

Rafts:

No

Supports: 

Doesn't Matter

Resolution:

0.1mm

Infill: 

15%

Filament: DasFilament PLA anthracite

Notes:

Maybe an slicer option like 'detect thin walls' has to be enabled to get good results, because some surface elements have a width of about 0.45mm (in the 66% scaled version).

Category: 3D Printing

Different surface details and combining into bigger chunk.