Hexagon coaster

The coaster has a diameter of 10cm.

The difference between Coaster.stl and Coaster_HigherBase.stl is a increased base height of 0.5mm.

This base is closed in Coaster_closedBase.stl to prevent that liquid drips onto the table.

It is possible to place a short (nick-)name to the open space of each coaster.

Print Settings

Printer Brand:

Prusa

Printer: 

I3 MK3S

Rafts:

No

Supports: 

No

Resolution:

0.10mm

Infill: 

25%

Filament: To your liking

Notes:

The hexagon walls are 0.5mm thick.
Use a small nozzle (0.25mm), play with overlap perimeters and/or detect thin walls settings if default settings does not work.

Category: 3D Printing