Bambu Lab AMS Hub Adapter Plate

Adapter plate to fit the AMS Hub in combination with a HEPA filter.
The default filament buffer screws (short) are used to attach the adapter to the printer.
For the AMS hub to the adapter the longer screws are used and fixed with two additional nuts at the back of the adapter. But the adapter is so tight it should also work without nuts.

Must be printed with support for the screw holes.
Printed in PETG and had no problems to remove the support.

HEPA filter model:
https://www.printables.com/de/model/379720-bambulab-hepa-filter

Adapter plate to fit the AMS Hub in combination with a HEPA filter.