Gigahorse-esque kit for gaslands/hotwheels

Come support these models over on Patreon Buy my time, Not my models.

Kit to make a gigahorse style car. Print one of the main file (gigihoss) and then choose your engine from 4x v8 engines, 2x jet engines, or a nuclear reactor. (nuke engine wants supports, the rest print without). You can also ignore the engines and just use this as a monster truck kit.

Assembly is not terribly easy(especially to keep level and square), but it does allow a LOT of freedom with where things are placed, frame angles, suspension positions, etc.

Parts notes:

• The 2 short and two long square pieces are the leading and trailing arms and glue to the inside of the body side flaps, cut as needed.
• the driveshaft should be glued to the diff first with the angled end turned to glue to the bottom of the frame
• Gas tanks glue to the sides of the body flaps
• pyramid piece is the mount for the front suspension uprights, there is a small notch on the frame to locate it.

-the flat disks are spacers for between the rear tractor wheels