Star Wars TIE Striker

A replica of the TIE/sk Striker from Rogue One.
It has movable print-in-place wings.
The scale is at 1:270 with a length of 63.6mm and a wingspan of 43mm. (The hinges are 2mm in diameter.)
Holder uses a small base and slanted pin from here.

Printed at 0.07mm layer height with supports on buildplate only. If you want to use the holder,  use the .gcode-file with peg or add a slanted peg before slicing.

If you want to support me, you can do so via this link: https://ko-fi.com/printingdaniel#