Simple bed side table
I made this simple table for the side of the bed to store phone or some other stuff.
10
24
0
463
updated October 14, 2023
Description
PDFThe printing not requires any support. Printed in PLA at 0.2.
The arm and the hook is at 50% the rest is 20% infill.
The assemly requires:
For the arm and hook:
4 pieses M6x20 countersunk bolts
4 pieces M6x1,5mm bolt
For the plate:
4 pieces M5x20 countesunk bolts
(Nuts not required the bolt can be screwed right to the arm nice and tight)
Tags
Model origin
The author marked this model as their own original creation.
